Step 7: Setting the IP Address
===========================================
CId Port Type IPMask Gateway Link
===========================================
1 | 1 | Mgmt | 192.168.10.87 | 255.255.255.0 | 192.168.10.1 | Up |
1 | 1 | iSCSI | 192.168.10.88 | 255.255.255.0 | 192.168.10.1 | Up |
1 | 2 | iSCSI | 10.0.10.2 | 255.0.0.0 | 0.0.0.0 | Down |
6.Repeat steps 3 and 4 to set the other iSCSI port. Use
To see the full set of CLI commands, at the admin@cli> prompt, type help and press Enter.
This completes the Management and iSCSI Port setup. Go to “Step 8: Creating Disk Arrays with WebPAM PROe” on page 24.
21
