Proson rv2600 dts Subwoofer Setting, Speaker Size Setting, Distance front, center, surround

Abbreviations FRONT L: front left FRONT R: front right CENTER: center SURR L: surround left SURR R: surround right SURR-B: surround back

Speaker Configuration 2

Subwoofer Setting

SUB W-Y (Subwoofer-Yes):

Select this when a powered sub-woofer is connected.

SUB W-N (Subwoofer-No):

Select this when no sub-woofer is connected.

•If you select “SUB-W N (no subwoofer)”, the front speaker is automatically set to “L”.

•To enjoy the full home theater experience, we recommend the use of a powered sub-woofer.

Speaker Size Setting

Each time the SELECT button is pressed, the setting is changed as follows:

L (Large):

Select this when the connected speakers can fully reproduce sounds below the Crossover Frequency.

S (Small):

Select this when the connected speakers are rather small and cannot reproduce sounds below the crossover frequency.

When this setting is selected, bass frequencies below the crossover frequency are output from the sub-woofer (if no sub-woofer is connected, from the front speakers).

N (None):

Select this when no speaker is connected. The sound is output from the front (or surround) speakers.

•Depending on your selection, settings available for each speaker changes.

•When the surround left and right speakers are set to “SURR N (none)”, the surround back speaker is also set to “SURR- B N (none)” automatically.

Distance (front, center, surround)

Input the distance from your listening position to front, center and surround speakers. The delay time is automatically adjusted to improve the surround effect.

You can change the setting from 0.1 to 9 meters, at 0.1 meter’s step.

Crossover Frequency

You can change the setting from 40 to 130 Hz in 10 Hz steps.

When the speaker size is set to “Small”, bass frequencies below the crossover frequency you set here are output from the sub-woofer (if no sub-woofer is connected, from the front speakers).

The default setting is 80 Hz.

17