Proson rv2600 dts owner manual Connection to audio/video components, ADIGITAL IN terminals

CD-R, MD, etc.

DVD, CD, etc.

A B

C

C

TAPE

D

DVD player or Decoder

Connection 1

CAUTION:

•Switch off the power to all equipment before making connections.

•Read the instructions of each component you intend to use with this unit.

•Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables.

Connection to audio/video components

ADIGITAL IN terminals

Used for the input of digital audio signals. Connect these digital input terminals to the appropriate digital output terminals of the digital audio source unit such as a DVD or CD player.

Use a good quality RCA coaxial cable or optical digital cable.

BDIGITAL OUT terminal

The digital signals coming in through the DIGITAL IN terminals are sent out through this terminal.

Connect to the digital input terminal of a digital recording device such as a CD recorder using a commercially- available optical digital cable.

When inserting the plug of the optical cable, the protective shutter of the terminal will open and you should hear it click into position when fully inserted. Be careful that you do not force the plug, because this could result in damage to the protective shutter, the cable, or the unit itself.

CAUDIO IN/OUT jacks

Analog 2-channel audio signal is input or output from these jacks. Connect the component with commercially- available RCA cables.

Make sure to connect:

white plug	white jack (L: left channel)
red plug	red jack (R: right channel)

DEXTERNAL IN jacks

If your DVD player or decoder has 6 or 7-channel analog audio outputs, connect them with good quality RCA cables.

If the component to be connected has only 6 channel outputs, do not use the SURROUND BACK jack.

6