Troubleshooting
If you experience any problems with the unit, please take a moment to look through this chart and see if you can solve the problem yourself before you call your dealer or a TEAC service center.
No power
Check the connection to the AC power supply. Check and make sure the AC source is not a switched outlet and that, if it is, the switch is turned on. Make sure there is power to the AC outlet by plugging another item such as a lamp or fan.
There is no sound or only a very
If the SPEAKER indicator isn’t lit, press the SPEAKER button to turn it on.
Check that the speakers and components are connected securely.
Check the operation of the connected component. Check the audio output setting of your DVD player.
Select the proper source using the INPUT SELECTOR buttons and the DIGITAL INPUTS button.
Select the proper surround mode (see page 25).
If “MUTE” is blinking on the display, press the MUTING button to restore the sound.
No sound from surround or center speakers. Check the speaker setting (see page 16).
Check the channel level setting (see page
Check the audio output setting of your DVD player. Play a
Severe hum or noise is heard.
Check that the speakers are connected securely.
Make sure the line cords and speaker cables are as far away from the AC supply as possible.
“DIGITAL” indicator blinks.
The unit cannot perceive the digital signal (see page 20). Select the proper decoding mode by pressing the AUTO button (see page 25).
No picture.
Check that the system is connected properly. Turn on the TV.
Make sure you have selected the proper video input on the TV so that you can view the pictures.
Select the proper video source using the INPUT SELECTOR buttons.
Cannot view the
The color system of the receiver does not match your TV.
Cannot listen to any station, or signal is too weak. Make sure the antenna is properly connected. Tune in the station properly.
If a TV is near the unit, turn it off.
Install the antenna again after relocating it to a better reception position.
An external antenna may be required.
Though the broadcast is stereo, it sounds monaural. Press the FM MODE button.
Remote control doesn’t work.
Press the POWER switch of the main unit to turn it standby.
If the batteries are dead, change the batteries.
Use remote control unit within the range (5m) and point at the front panel.
Clear obstacles between the remote control unit and the main unit.
If a strong light is near the unit, turn it off.
If normal operation cannot be recovered, unplug the power cord from the outlet and plug it again.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth or use diluted mild liquid soap. Be sure to remove any excess completely. Do not use thinner, benzine or alcohol as they may damage the surface of the unit.
37
