Proson rv2600 dts owner manual Surround Mode, Stereo

Surround Mode 2

CWhen MPEG signals are input and IN-AUTO is selected, the surround mode is set to MPEG automatically. The DSP button doesn’t work.

DWhen the source is PCM (2-channel stereo) and IN-AUTO or IN-PCM is selected, or when analog stereo signals are input, you can select one of the following surround modes:

DOLBY PRO LOGIC IIx MOVIE, DOLBY PRO LOGIC IIx

MUSIC, DOLBY PRO LOGIC, VIRTUAL NARROW, VIRTUAL WIDE, DTS NEO:6 CINEMA, DTS NEO:6 MUSIC, THEATER, HALL, STADIUM

•When the DSP button is pressed once, the current surround mode is displayed. Press the DSP button repeatedly to select any other surround mode.

•When you press the DSP button, the sound is cut off for a moment.

•When the surround back speaker is set to “None”, Dolby Pro Logic II appears instead of Dolby Pro Logic IIx.

•DOLBY DIGITAL or DOLBY DIGITAL EX can be selected only during playback of a DVD disc recorded in DOLBY DIGITAL format.

•The DSP indicator lights when THEATER, HALL or STADIUM is selected.

(DSP: Digital Signal Processor)

STEREO

Press the STEREO button to select the stereo mode. “STEREO” is scrolled, and sound is output from front speakers (and the sub-woofer if connected).

To cancel the stereo mode, select any other surround mode by pressing the DSP button.

•If you select the stereo mode while the digital signal of DOLBY DIGITAL or DTS are being input, the multi-channel sound is downmixed to 2-channel.

•If the SPEAKER button is set to off while the digital signal of DOLBY DIGITAL or DTS are being input, the multi-channel sound is downmixed to 2-channel automatically. And when the SPEAKER button is set to on, it will return to the previous surround mode.

26