APOWER
Press this switch to turn the unit standby or off.
The equipment draws nominal
BSTANDBY/ON
When the POWER switch of the main unit is depressed, use this button to turn the unit on or standby.
CSPEAKER
Use this button to turn on or off the speakers. on : Sound is output from the speakers. off : No sound is output from the speakers.
DDIGITAL INPUTS
Use this button to select one of the digital input terminals.
EStandby indicator
This indicator lights when the unit is in the standby mode. When the unit is turned on, it goes off.
FSpeaker indicator
This indicator lights when the SPEAKER button is set to on.
GRemote Sensor
When operating the remote control unit, point it towards the remote sensor.
HDisplay
When the unit is on, the current status of the unit is displayed.
IMASTER VOLUME
Turn this knob (or press the VOLUME buttons of the remote control unit) to adjust the master volume.
JINPUT SELECTOR
Use this buttons to select a source.
KEXTERNAL IN
Use this button to select the source connected to the EXTERNAL IN jacks.
LAUTO
Use this button to change the decoding mode of digital signals.
MDSP
Use these buttons to select a surround mode.
NSTEREO
Use this button to select stereo mode. Sound is output only from the front speakers (and the
OPARAMETER
Use this button to change parameters of DOLBY PRO LOGIC IIx MUSIC.
PPHONES
For private listening, insert the headphones plug into this jack, and adjust the volume by turning the MASTER VOLUME knob.
QCHANNEL SELECTOR
Select a speaker by pressing this button repeatedly, and adjust the level using the LEVEL buttons.
RSELECT/LEVEL
Use these buttons to adjust the level of each speaker, etc.
STONE MODE
Use this button to select a tone mode.
TSPEAKER SETUP
Use this button to start speaker configuration.
UDYNAMIC RANGE
Use this button to compress the dynamic range during playback of a disc recorded in Dolby Digital.
VMEMORY/ENTER
Use this button to store preset channels into memory.
WTUNING/PRESET
In the manual tuning mode, use these buttons to tune in a station.
In the preset tuning mode, use these buttons to select a preset channel.
XTUNING MODE
Use this button to select a tuning mode.
YFM MODE
In FM tuner mode, use this button to select stereo or monaural.
ZBAND
Use this button to select FM or AM.
aVIDEO 3 INPUT jacks
You can connect a component such as a portable CD, game player, etc. to these jacks.
When using these jacks, remove the cap. When you don’t use them, leave the cap in place.
bButtons for RDS function (European models only)
In FM tuner mode, use these buttons for RDS function. RDS is available in European countries only.
13