1
2
RDS Search
A station can be searched by this function.
1Select FM by press the TUNER button of the remote control unit.
2Press the SEARCH MODE button.
Each time the SEARCH MODE button is pressed, the search mode is changed as follows:
RDS search
Select “RDS SRCH” by pressing the SEARCH MODE button, and within 8 seconds press the SELECT button. The unit starts searching and “RDS SRCH” blinks.
When a station offering RDS services is found, the station’s name will be displayed.
If the station found is not the desired one, press the SELECT button again while the RDS indicator is blinking.
If no RDS station is found, “NO RDS” will be displayed.
TP search
Select “TP SRCH” by pressing the SEACH MODE button, and within 8 seconds press the SELECT button.
The unit starts searching for a station offering the traffic programme, and “TP SRCH” blinks.
If no station is found or the signal is too weak, “NO TRAFF” will be displayed.
PTY search
1.Select “PTY SRCH” by pressing the SEACH MODE button.
2.Within 8 seconds, select the desired PTY programme by pressing the PTY SELECT button.
You can select from 31 kinds (see page 36).
3.Press the SELECT button. The unit starts searching.
When the programme that you have selected is found, searching will stop and the programme type will be displayed.
If no station is found or if the signal is too weak, “NO PROG” will be displayed.
35
