Code 39
Code 39 — continued
Code 39 Length 1, Length 2 Programming Instructions
1.Scan the START/END bar code.
2.Scan either the Set Length 1 or Set Length 2 bar code.
3.Turn to Appendix C,
For Code 39 bar codes, all check, data and full ASCII shift characters (even if full ASCII is enabled) are
| included in the length calculations. Start/Stop charac- |
NOTE | ters are not included. |
|
4. Scan the START/END bar code.
START / END
PROGRAMMING BAR CODES
Set Length 1
DEFAULT SETTING FOR THIS FEATURE: 003
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 050
Quiet Zones
This feature enables/disables the requirement that quiet zones must be present for Code 39 bar codes.
START / END
PROGRAMMING BAR CODES
Don’t require Quiet Zones
DEFAULT
Require Quiet Zones
Product Reference Guide |