PSC 1400I manual ACK NAK Retry Count

Interface Related Features

RS-232 Interface Features — cont.

ACK NAK Retry Count

START / END

PROGRAMMING BAR CODES

This feature sets the number of times for the scanner to retry a label transmission under a retry condition.

000 = No retry

001 - 254 = Retry for the specified number of times 255 = Retry forever

To configure this feature, scan the “START/END” bar code above to place the unit in Programming Mode, then the “Set ACK NAK Retry Count,” followed by the three digits (zero padded) from the Alphanumeric table in Appendix C, Alpha-Numeric Pad repre- senting your desired retry count. Exit programming mode by again scanning the “START/END” bar code above

DEFAULT SETTING FOR THIS FEATURE: 003

Set ACK NAK Timeout Value

3-22 Magellan® 1400i