PTZ Pan, Tilt, Zoom, PTZ menu description | Q-See QSD42908C8

QSD42908C8 User’s Manual

5.17 PTZ (Pan, Tilt, Zoom)

There is one RS-485 port on the DVR rear panel used for PTZ camera control. You can setup RS-485 parameters to match your PTZ protocol. In main menu, move the “Active Frame” to PTZ

icon and press【ENTER】key, you will enter into PTZ menu as shown in fig 5.29

Fig 5.29 PTZ parameters setup

PTZ menu description

Select channel: Select a PTZ camera.

RS-485 parameters: Including baud rate, data bit, stop bit, parity, flow control, etc. These parameters must be the same as those of PTZ. Protocol.

PTZ address: Each PTZ has a different address.

PTZ type: DVR supports the following PTZ protocols: YouLi, LinLin-1016, LinLin-820, Pelco-p, DM DynaColor, HD600, JC-4116, Pelco-d WX, Pelco-D, VCOM VC-2000, NetStreamer, SAE/YAAN, Samsung, Kalatel-312, CELOTEX, TLPelco-p, TLHHX-2000, BBV, RM110, KC3360S, ACES, ALSON, INV3609HD, Howell, Tc Pelco P, Tc Pelco D, AUTO-M, AUTO-H, ANTEN, CHANGLIN, DeltaDome, XYM-12, ADR8060, EVI-D30, DEMO-SPEED, DM-PELCO-D, ST832, LC-D2104, HUNTER, A01, TECHYIN, WEIHAN, LG, D-MAX, Panasonic, KTD-348, infinova, PIH-7625, LCU, DennarDome, etc. Other PTZ protocols may be added with new firmware updates.

Note: In DVR “PTZ” menu, if you select Pelco-P protocol, when you setup PTZ address,

67

Image 67

Q-See QSD42908C8 user manual PTZ Pan, Tilt, Zoom, PTZ menu description

Contents

QSD42908C8 Net DVR User’s Manual Index Chapter 100 Tech Support Product Introduction FeaturesSummary Others Network function Checking the DVR and Its Accessories Installation Rear Panel Description System Setup Front Panel Operational InstructionsIndex Type Name Description Ready Index Name Description IR Remote Control If Remote Control Does Not Work Starting the Remote ControlDisabling the Remote Control Powering Down the DVR Menu Description Main Menu Description How to enter into menu mode QSD42908C8 User’s Manual How to exit menu Input text Basic Operation Guide Power onPreview Icon Icon Color Status Description Recording status Form 4-1 Camera record status Alarm status Login User name and passwordChange Password QSD42908C8 User’s Manual PTZ Control Interface PTZ Pan/Tilt/Zoom Control PTZ Control Keys Description Adjust Preset DescriptionStart/Stop Auto in PTZ Control Mode Select Channel Manual Record Exit PTZ Control ModeDescription Playback Interface Playback Description Playback With Mouse Attached Control Bar Functions Backup Daily Recorded Files Backup Recorded Files Select backup device Using【POWER】key of front panel or IR remote control Shutting down the DVR normally Using menu Administrator and Password Parameters Setup GuidePassword modification User management Add user Add and Delete UserEnter into User Management menu shown in fig Setup the rights for new user Setup the password for new userAdd new user name User rights description Local Save the new user’s password and rights MAC address Remote through network or internetDelete user Unit name Unit Name and Device IDDevice ID Video output standard Video Output Standard and VGA SetupCamera name and OSD On Screen Display Setup VGA setup System Time Camera Name Position Date OSD Position Video Parameters Setup Mask Area Setup Disable the mask check box means cancel the mask area Enter into Camera menu View Tampering Alarm Video Loss Alarm QSD42908C8 User’s Manual Interface shown as fig Motion Detection Clear motion area QSD42908C8 User’s Manual Preview Properties Preview properties Recording Setup Bit Rate Type Recording menu description Select a day and enable all day recording option All day recording setup Enter into recording schedule menuRecord type Save Select one day and disable all day recording optionSetup time period and record type Copy to other days Enter into Alarm in Handling sub menu External Alarm Input and Relay OutputExternal alarm input setup Alarm type Save setup Alarm trigger record channel setupSchedule for alarm handle method Alarm handle method PTZ Linkage Setup alarm out schedule Alarm relay output setupSelect delay time Enter into alarm out schedule Exceptions Network menu description Network Parameters Advanced setup description PPPoE DVR supports PPPoE dail-up function Accessing the DVR over a network Accessing the DVR from a remote computer PTZ menu description PTZ Pan, Tilt, Zoom Preset setup Sequence setup Cruise setup RS232 menu description 18 RS232 setup Example PPP Modem passive dialup through Pstn Setup at DVR end Setup should pay special attention to QSD42908C8 User’s Manual Establish the dialup connection Utilities Restore Parameters Upgrade Hard Disk Management Stop Alarm OutReboot Power Off By Type View Log By Time For example The steps of viewing alarm logBy Type&Date System Information FTP Server Setup Firmware Upgrade Setup username Upgrade Mode QSD42908C8 User’s Manual QSD42908C8 User’s Manual QSD42908C8 User’s Manual Step Step Appendix a Mouse Control Function User interface Test input interfaceScroll wheel forward Playlist interface = d i ⎟ 8⋅ 3600 ⎟1024 Appendix B HDD Capacity Calculation RJ45 introduction Pin definition How to Make a RS-485 Connect CableAppendix C DVR Connect Cable Definition Material and tool How to Make a UTP network Connect Cable How to Make a RS-232 Connect Cable Corresponding relationship of cross cable PAL 15FPS, Ntsc 20FPS Appendix D DVR Specifications Models QOCDC60 QOCDC36 Appendix D Camera Specifications Failure Possible reasons Appendix E Troubleshooting Appendix F Product Service & Warranty Appendix G Customer Information Card 101