QSC Audio PLX 2402 Dynamic Headroom, Distortion, Frequency Response, Damping Factor, Voltage Gain

	S P E C I F I C A T I O N S			S P É C I F I C A T I O N S		TECHNISCHE DATEN	ESPECIFICACIONES
	PLX 1202		PLX 1602		PLX 2402	PLX 3002	PLX 3402
OUTPUT POWER in watts
20 Hz–20 kHz @ 0.03% THD
8Ω per channel	200		300		425	550	700
20 Hz–20 kHz @ 0.05% THD
4Ω per channel	325		500		700	900	1100
EIA: 1 kHz @ 1% THD
8Ω per channel	215		325		475	625	800
4Ω per channel	375		550		825	1050	1250
2Ω per channel	600		800		1200	1500	1700
Bridge Mono:
16Ω, 20 Hz–20 kHz, 0.1% THD	400		600		850	1100	1400
8Ω, 20 Hz–20 kHz, 0.1% THD	700		1000		1500	2000	2200
4Ω, 1 kHz, 1% THD	1200		1600		2400	3000	3400
DYNAMIC HEADROOM	2 dB @ 4Ω
DISTORTION
SMPTE-IM	< 0.01%		< 0.01%		< 0.02%	< 0.02%	< 0.02%
FREQUENCY RESPONSE	20 Hz–20 kHz, ±0.15 dB
(at 10 dB below rated output power)	-3 dB points: 5 Hz and 100 kHz
DAMPING FACTOR	> 500 @ 8W
NOISE (unweighted 20 Hz to 20 kHz, below rated output)	106 dB		107 dB		108 dB	107 dB	107 dB
VOLTAGE GAIN	40× (32 dB)
INPUT SENSITIVITY, V RMS
full rated power @ 8Ω	1.0v (+2.2 dBu)		1.2v (+3.9 dBu)		1.5v (+5.5 dBu)	1.7v (+6.8 dBu)	1.9v (+7.7 dBu)
full rated power @ 4Ω	0.9v (+1.3 dBu)		1.1v (+3.2 dBu)		1.3v (+4.6 dBu)	1.5v (+5.7 dBu)	1.7v (+6.6 dBu)
INPUT IMPEDANCE	6 KW unbalanced
	12 KW balanced
CONTROLS	Front: AC switch, Ch. 1 and Ch. 2 gain knobs with 11 detents
	Rear: 10-position DIP switch
INDICATORS	POWER:	Green LED		CLIP:	Red LED, 1 per channel
	PARALLEL:	Yellow LED		-10 dB:	Green LED, 1 per channel
	BRIDGED:	Yellow LED		-20 dB:	Green LED, 1 per channel
				SIGNAL:	Green LED, 1 per channel
CONNECTORS	Input:	XLR and ¼" (6.3 mm) TRS, tip and pin 2 positive
	Output:	“Touch-Proof” binding posts and Neutrik Speakon™
COOLING	Continuously variable speed fan, back-to-front air flow
AMPLIFIER PROTECTION	Full short circuit, open circuit, thermal, ultrasonic, and RF protection
	Stable into reactive or mismatched loads

28