Quadrant tech C-1.2D manual CineMaster cable connections

8.Connect one end of the long audio cable to CineMaster’s MPC-3 Audio Input connector, and the other end to the DVD-ROM drive’s Audio Out connector. Then connect CineMaster to the sound card’s connector that formerly went to the DVD drive, by connecting one end of the supplied short audio cable to CineMaster’s MPC-3 Audio Output connector, and the other end to the sound card connector. Refer to Figure 3.

Figure 3: CineMaster cable connections

9.Connect the supplied ribbon cable from the 26-pin VMI Video Port Connector on CineMaster to the matching Video Port Connector on your VGA Card.

8 CineMaster User’s Guide