![](/images/new-backgrounds/1117563/117563231x1.webp)
Perform Configuration
know all the essential information about the device. A series of questions will be asked to guide the user through the process. The questions will vary based on the ‘Current’ map protocol. The user will be asked to select the Index for a device, then the protocol/port on which device will reside, then the Name for the device (which can be left empty), then the type of device:
Note: If the device being added is a SCSI device, the user will also be asked to enter Target ID and LUN ID for the device. Target ID must already be defined in the SCSI Configuration. Otherwise, adding a device will not be permitted.
Note: When creating a device that does not exist, it will be displayed with ‘Down’ status.
Remove Gaps
This option removes any incremental gaps in the sequence of LUNs listed in the table.
Deleting an Entry
The user selects a LUN ID.
Table 30 Deleting an Entry
Select Idx to delete (X=Cancel, D=DeleteMultiple) > 1
Are you sure you want to delete Idx 1? (Y=Confirm, X=Cancel) > y
Select D to delete multiple LUNs:
Quantum TC2201 User’s Guide | 96 |