Quantum manual Real Time Clock Configuration, Real-Time Clock Quantum TC2201 User’s Guide

Chapter 2 TC2201 Web Interface

System Page

		Note: In the event that either or both the user name and password
		are forgotten, it is possible to reset the user name and
		password to their default values by resetting the TC2201 to
		factory defaults from the Command Line Interface using the
		serial port (see appendix C on page 71). Note that resetting to
		factory defaults from the serial port will also reset all other
		configuration settings to factory defaults, as well as erase all
		current maps. It is recommended to capture a copy of the
		system report (available from the System Utilities Menu) in
		order to make reconfiguration easier.
		This Real-Time Clock configuration page allows you to set up of the date
	Real Time Clock
Configuration		and time for the TC2201.
		To access the Real-Time Clock page:
		1 Click Real-Time Clock in the System menu.
		The Real-Time Clock page displays (see figure 13):
Figure 14 Real-Time Clock Page

Quantum TC2201 User’s Guide 20