Quantum TC2201 manual Buffered Tape Writes, For buffered tape writes

Chapter 2 TC2201 Web Interface

SCSI Bus Page

Figure 22 SCSI target Overrides

Settings Page

To finalize any changes for the override settings, select the Submit button.

	Note: Override settings should not be changed except by or under
	the direction of an authorized Quantum technician.
	• Wide Negotiation enables/disables the option for negotiation on a
	wide SCSI bus. The default setting is Enabled.
	• Sync Negotiation enables/disables the option for synchronous
	negotiation on the SCSI bus. The default setting is Enabled.
	• Alternate Block Size enables/disables block sizes of 520 bytes each,
	which is the common block size used in AS/400 environments. The
	default setting is disabled.
	• Ultra SCSI 3 Negotiation enables/disables Ultra SCSI 3 support for the
	selected Target ID. This feature is useful for solving certain
	compatibility issues in mixed vendor environments, where, for
	example, there may be a device that cannot handle automatic
	negotiation of the bus speed, or possibly where there is a device that
	does negotiate to use Ultra SCSI-3 but somehow cannot actually
	handle the speed. The default setting is Enabled.
	This Buffered Tape Writes page allows for making configuration changes
Buffered Tape Writes
	for buffered tape writes.
	To access the Buffered Tape Writes page:

Quantum TC2201 User’s Guide 30