Chapter 2 TC2201 Web Interface
Ethernet Page
Figure 18 Ethernet Overrides
Settings Page
To finalize any changes for the override settings, select the Submit button on the Ethernet Override Settings page.
Note: Override settings should not be changed except by or under the direction of an authorized Quantum technician.
•Current MAC address is the current Media Access Control (MAC) address configured for the TC2201. The MAC address is a hardware address that uniquely identifies each physical node on an Ethernet network. While the MAC address can be changed, it is highly recommended not to change this address.
•Original Factory MAC address is the MAC address assigned by the hardware manufacturer to the Ethernet adapter in the hardware. The TC2201 comes initialized with this assigned MAC address.
•Ethernet MTU Size is the Maximum Transmission Unit (MTU) for Ethernet. This setting can be configured for 1500 or 9000 byte frames. The Ethernet Management port is permanently set to 1500 and cannot be changed. The default setting for the iSCSI ports is also 1500 but a value of 9000 can be configured for jumbo frame support for iSCSI frames.
Quantum TC2201 User’s Guide | 26 |
