![](/images/new-backgrounds/1117563/117563109x1.webp)
Chapter 2 TC2201 Web Interface
iSCSI Mapping Page
•Select the Activate Mapping Changes button to dynamically update the current map without rebooting the TC2201. These changes are made effective immediately after being submitted.
Caution: Before activating any port mapping changes, it is strongly recommended that the user verify there are not any command or data operations occurring in conjunction with devices affected by the mapping changes. For example, deleting a LUN or device from a map may disrupt I/O transfers with that device. It is the user’s responsibility to ensure that no operations will be negatively impacted due to the activation of mapping changes.
Note: All current Mapping Settings will take effect immediately! If another management interface has made unsaved mapping changes, those changes will be lost.
Note: If the Activate Mapping Changes button is not selected, the mapping changes will not take effect unless the TC2201 is rebooted.
The following shows the select host page when the Select Host Edit/View button is selected (see figure 26).
Quantum TC2201 User’s Guide | 35 |