Chapter 2 TC2201 Web Interface
System Page
Figure 12 iSNS Settings Page
iSNS servers maintain information about iSCSI clients and will respond to iSNS protocol queries and requests, and initiate iSNS protocol State Change Notifications.
To use iSNS, enable the TC2201 as a client and then enter a DNS name or IP address for up to three iSNS servers. To make changes or to discontinue communication with a server, change or clear the identification field(s), select the Submit button, and then reboot the TC2201 to activate changes.
•iSNS Client can be toggled between Enabled and Disabled. The default setting is Disabled. When enabled, the TC2201 will function as an iSNS client and will initiate transactions with iSNS servers using the iSNS Protocol. The iSNS client is a process that is co- resident in the TC2201, and which can register device attribute information with the iSNS server. The capability is used for automated device discovery.
•Server 1, Server 2, and Server 3 can be set up by entering a DNS name or IP address into the field for iSNS Server and entering the server TCP Port into the field TCP Port. The standard value for TCP Port is 3205.
Quantum TC2201 User’s Guide | 18 |
