|
| Perform Configuration |
| This menu changes security settings, including the user name and | |
| User Settings | |
Configuration | password. User names and passwords should be unique and kept | |
|
| confidential and it is recommended to use a combination of letters and |
|
| numbers when creating user names and passwords. The default values |
|
| are “root” for user name and “password” for password. |
Table 10 User
Settings Configuration
Menu
| User Settings | |
X.XX.XXXX | XXXXXX | XXXXXXXXXXXXXX |
07/26/2005 | 08:56:22 | |
Current Username | : root |
|
1)Change Username
2)Change Password
X) Return to previous menu
Note: In the event that either or both the user name and password are forgotten, it is possible to reset the user name and password to their default values by resetting the TC2201 to factory defaults. Note that resetting to factory defaults from the serial port will also reset all other configuration settings to factory defaults, as well as erase all current maps. It is recommended to capture a copy of the system report (available from the System Utilities Menu) in order to make reconfiguration easier. If a backup configuration file was previously saved (as described in Chapter 8), this file can also make the reconfiguration process much easier.
Baud Rate | This menu changes the baud rate used on the serial port. Select 1 through |
Configuration | 5 for the appropriate baud rate setting. The default setting for the baud |
| rate is 115200. |
Quantum TC2201 User’s Guide | 75 |
