Quantum Data 802 quick start Special Operating Modes and Functions, Overview

Special Operating Modes and Functions

Overview

			Special Modes
Mode		_	Hold at power-on _	Current status _
Remove all modes			ACS, DCS, DSS	–
Set GPIB Address			DCS	15
Set baud rate to 9600			R, DCS	2400,N,8,1,N,N
Enable programmable keypad			R, OUTPUT	OFF
Initialize w/factory defaults			ACS, DSS	–
Calibrate			R, G, B	–
Enable Programming			STEP	OFF
Enable numeric keypad			R	OFF
Clone			STEP, OUTPUT	–
Digital friendly mode			G, B	OFF
Analog friendly mode			R, B	OFF
Enable status display			STEP, G, B	OFF
Old format library			G	OFF
		Special Key Operations
Function	_	Hold first, press second_		Current status _
Toggle analog/digital		G, B		Analog
Rotate video type		R, B		RGB Color
Set pixel depth		R, G		8
DDC-based autoconfig		R, ACS		FMT: fmt

GenOps Test Image

Front panel button combinations are used to select the generator's optional operating modes and special functions. Some are only activated at power up while others are activated once the generator is running. The built-in GenOps test image shows the current status of all options. The upper portion of the image lists the modes that can only be changed on power up and the lower portion lists functions that are selected once the generator is in use. The left hand columns list the names of the modes or special functions. The center columns list the required button combinations and the right hand columns indicate the current status of the mode or function. All of the special modes and functions are de- scribed on the following pages.

Model 802 Series Quick Start Guide • 5 •