Power-up Modes
Digital Friendly Mode
This operating mode causes the generator to override a given format's analog video output type selection and output digital video. This mode is activated by holding down the indi- cated buttons on power up.
Image |
|
|
| Video Gate |
|
|
|
|
| Sync Gate |
|
|
| Outputs | ||||||||
| STEP | R |
| G | B |
|
|
| ACS |
| DCS | DSS |
|
|
| ON | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This mode will be retained when the unit is turned off and can only be deactivated by Removing all modes, Initializing with factory defaults, or selecting Analog Friendly mode.
Digital Friendly mode only affects formats loaded using the front panel Format knob. Formats loaded using commands via the communications ports or as part of a Test Sequence are not affected.
You can still use the Toggle Analog/ Digital function to temporarily switch a format's video type to analog when needed.
CAUTION!
Enabling Digital Friendly mode on a generator without a digital video option installed will turn off all out- puts and report Error 2741 (Digital video type not supported) for every format loaded with the front panel knob.
Analog Friendly Mode
This operating mode causes the generator to override a given format's digital video output type selection and output analog video. This mode is activated by holding down the indicated buttons on power up.
Image |
|
|
| Video Gate |
|
|
|
|
| Sync Gate |
|
| Outputs | ||||||||
| STEP | R |
| G | B |
|
|
| ACS |
| DCS | DSS |
|
| ON | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This mode will be retained when the unit is turned off and can only be deactivated by Removing all modes, Initializing with factory defaults, or selecting Digital Friendly mode.
Analog Friendly mode only affects formats loaded using the front panel Format knob. Formats loaded using commands via the communications ports or as part of a Test Sequence are not affected.
You can still use the Toggle Analog/ Digital function to temporarily switch a format's video type to digital when needed.
CAUTION!
Enabling Analog Friendly mode on a generator that does not have analog video hardware installed will turn off all outputs and report Error 2748 (Analog video type not supported) for every format loaded with the front panel knob.
Model 802 Series Quick Start Guide | • 7 • |
