5. SETTING
Preparation for setting
To prepare for setting:
1 Unlock the unit. While holding down | 2 Remove the panel cover. |
the panel, open buttons at both sides of the |
|
unit and lift the panel cover away from |
|
you. |
|
| Panel open button |
Panel cover | (at both sides of the unit) |
|
Key hole
Panel house | Display | Control button |
3 Make settings using the display and control buttons at the panel house.
Be sure to make settings with the power on.
Upon opening the panel cover, the PAY ENDING button lights up and the unit is in the pay ending setting mode.
Make sure to press SET at the completion of each setting. Contents are NOT stored in memory if SET is not pressed.
8
