Wall Mounting

The unit can be mounted on a wall using the supplied mounting fittings. To mount the unit on a wall, take the following steps:

1 Install the two larger screws into a wall

3.94inches (10 cm) apart. Be sure to keep about 0.12 inch (3 mm) of the screw head out of the wall.

.94"

(10cm)

 

3

 

The supplied screws are intended for use on a thick wooden wall or wooden column. Do not use them on any other materials. There is a danger that the unit may come off.

(3mm)0.12"

2 Mount the wall mount fittings as shown on the right.

Environmental Conditions

Avoid placing the unit in environments that are:

humid or dusty

exposed to direct sunshine

subject to frequent or continuous vibrations

outside the temperature range between -5° and 45°C

affected by chemicals or ozone

6

Page 8
Image 8
Quartz 500 operation manual Wall Mounting, Environmental Conditions, Mount the wall mount fittings as shown on the right