Connecting to AN External Time Signal | Quartz 500 guide

6.CONNECTING TO AN EXTERNAL TIME SIGNAL

Follow the steps below to connect to an external time signal device.

1 Unscrew the screw fixed on the bottom of the unit to remove the lid.

Screw

Lid

2 Insert two wires for an external time signal while pushing the upper part of the terminal board with a screwdriver.

3 Replace the lid after pulling the wires through the U-shaped cut provided on the lid.

Connection Specifications for

External Contact

•Contact output: One circuit, dry contact

•Contact capacity: 5A, 30VDC (Resistive)

27

Image 29

Quartz 500 operation manual Connecting to AN External Time Signal

Contents

Simplex Page Table of Contents Signs Precautions Features Features AccessoriesKeysRibbon cassette Hour indication Current time AM or PM Current date Panel open button Installing the Ribbon Cassette Mount the wall mount fittings as shown on the right Wall MountingEnvironmental Conditions Daily Operations Preparation for setting SettingTo prepare for setting Unlock the unit. While holding down Key hole Panel house Display Monthly Closing Setting the Pay Period Today is printed on the second line from the top Weekly Closing Today is printed on the ninth line from the top Bi-Weekly Closing Check the settings on the display When you want to apply 12 hourSecond button from the left To set the number, the digits must 12Hr. SU MO TU WE TH FR SA 100 Case of the day advance time 730 a.m Setting the Day Advance TimeDay advance time Daylight saving time function Setting the Daylight Saving Time D.S.T Start date of D.S.T /60 How to Cancel D.S.T. Settings Setting the Time Table Program Time to be set Print color 00 Black 01 Red 3Print column To set P-01 shown in the table Erase under TU MinuteErase under MO Staying lit up 1/100 Erase under MO SA Make the bars External 1/60 time signal 1/100Under MO-SA Light up Indication at To check program settings Press Select to cause EXT. Alarm to light up Setting Number of Seconds for External Time Signal Resetting Connecting to AN External Time Signal Installing the Ni-Cd Batteryoptional External time signal SpecificationsTemperature -5 to + 45C Connection Time Card Specifications Weekly Card Bi-Weekly Card 1406-9806