HCD-E1 Installation & Operation Manual Appendix E - IR-IP Interface Module
Management Access Menu E-13
E.8 Management Access Menu
The Management Access menu is used to enable the use of passwords to
protect the access to IR-IP management utility, and control the inactivity
time-out interval.
When password protection is enabled, a Telnet management session can
start only after the correct password is entered.
To access the Management Access menu:
• From the Main menu, type 2.
The Management Access menu appears (Figure E-8).
IR_IP <IR-IP> S/W Ver. 1.00 31/IR (date)
Quick Setup
Management Access
=====================================================================
1. Telnet Password :..........
2. Telnet Inactivity Timeout (min) :300..
3. SNMP Access :Disabled
4. SNMP Read Community :public....
5. SNMP Write Community :public....
6. SNMP Trap Community :public....
7. SNMP Management Table :>>>
Press one of the numbers to select or ESC:
Figure E-8 Management Access Menu
Note
Since the IP router card does not support SNMP management, the SNMP
Read Community, SNMP Write Community, SNMP Trap Community, and
SNMP Management Table parameters are not used.
Telnet Password By default, management access to IR-IP via Telnet is unrestricted. To
restrict access, enter a Telnet password by selecting 1 in the Management
Access menu. The password can include up to 10 characters, and is case-
sensitive. The next time a Telnet session is opened, a password must be
entered to enable you to access the IR-IP menus.
At any time, only one Telnet connection to IR-IP is permitted. Any attempt
to open an additional connection while the current session is open is
rejected.
Telnet Inactivity
Timeout
This parameter specifies the time a Telnet session is kept open when there
is no keyboard activity. When the specified time-out expires, the Telnet
session is closed and another user can access IR-IP.