Radio Shack owner manual ADDING/DELETING the Area Code, Dialing Numbers from Caller ID Records

Caller ID Messages

Display	Description
D[m0ýNN	Shows the number of
JejWb0ýNN	new Caller ID records
	(records you have not
	reviewed) and the total
	number of records.
Fh_lWj[ýDWc[ orý	The caller has blocked
Fh_lWj[ýDkcX[h	the Caller ID information.
KdademdýDWc[ýorý	The caller is not within a
KdademdýDkcX[h	Caller ID service area.
?dYecfb[j[ý:WjW	Appears if there was an
	error during the transmis-
	sion of Caller ID informa-
	tion. Occasional errors
	are normal. If the phone
	frequently displays
	?dYecfb[j[ý:WjW, contact
	your local telephone com-
	pany or RadioShack
	store.

ADDING/DELETING THE AREA CODE

When the area code of the received call is the same as the one you stored (see “Storing Your Area Code” on Page 13), the Caller ID record does not show the area code. If it is different, the record shows the area code.

However, you can add or delete the area code on the display. When the record is on the display, press 3 to add or delete the area code. Pressing 3 again deletes or adds the area code.

When you dial the number or store it into memory, the phone dials or stores the num- ber as it appears on the display.

DIALING NUMBERS FROM CALLER ID RECORDS

1.Press CID, then VOL/CID 8 or 9 to recall the record.

If it is a long distance call, press 1 (' appears before the displayed number) before you press TALK.

If you want to add or delete the area code, press 3 before you press TALK.

2. Press TALK.

Note: If a Caller ID record does not contain a phone number (if it was blocked by the caller, for example), you cannot dial from that record.

STORING A CALLER ID NUMBER IN MEMORY

1.Press CID, then VOL/CID 8 or 9 to recall the record you want to store.

If it is a long distance number, press 1.

If you want to add or delete the area code, press 3.

2.Press MEM. I[b[YjýBeYWj_ed appears.

3.Choose a memory location (01–20) by

pressing a number or by repeatedly pressing VOL/CID 8 or 9.

4.Press SELECT.

If the selected location is empty, the TAD beeps to confirm that it stored the num- ber, then the Caller ID record appears.

If a record exists in the selected loca- tion, H[fbWY[ý C[ceho5 appears, prompt- ing you to confirm the replacement. Move the cursor to O[i or De, then press

SELECT.

DELETING CALLER ID RECORDS

You can delete Caller ID records individually or all at once.

Caller ID Operation 21