Note: If the selected mail box contains new (unplayed) messages, the TAD announces “Please play back all messages” and does not delete any message.
Setting the TAD to Answer Calls
At the command prompt, press #, 6. The TAD announces the current outgoing message, and sets itself to answer the next call.
Recording a New Outgoing Message
At the command prompt, press #, 8. The TAD announces “Record your outgoing message after the tone.” When you hear the beep, start speaking your new outgoing message (up to 30 seconds long). When you finish, press #, 5 or #, 8. The TAD plays back the new outgoing message.
Setting the TAD Not to Answer | Listening to the Help Guide |
Calls | At the command prompt, press #, 0. |
| |
At the command prompt, press #, 9. The TAD |
|
announces “Answer off.” |
|
Recording a Memo |
|
1.At the command prompt, press #, 7. The TAD announces “Please select mail box.”
2.Press # and the mail box number. The TAD announces “Record your message after the tone.”
3.When you hear the beep, start speaking your memo.
Note: If the TAD’s memory is full, the TAD announces “No remaining time” and returns to the command prompt.
4.When finished, press #, 5 or #, 7.
Note: The length of the memo recorded by remote operation must be over 2 seconds and within 4 minutes.
Answering System Operation | 29 |