17-1101.fm Page 43 Wednesday, July 21, 1999 9:57 AM

Note: To exit without changing the calling card settings (if you are changing only the access number, for example), press CLR .

6.Enter the card number, then press OK .

The phone briefly displays STORED to confirm that the selected card information is activated and stored.

To clear a stored calling card number, follow Steps 1–4 and select the setting NO CARD in Step 4. The phone erases all card information and exits the menu.

Using a Stored Calling Card Number

Follow these steps to make a long-distance call us- ing the calling card number you stored.

1.Enter the desired area code and phone num- ber, then hold down SEND until the phone dis- plays CARD CALL and IN USE. CARD CALL remains on the display until the access num- ber is sent to the network, then the phone prompts you to wait for a tone or voice prompt

(WAIT FOR PROMPT).

Note: If no calling card is stored in memory, the phone makes a normal call to the phone number you entered.

43

Page 43
Image 43
Radio Shack CT-400 owner manual Using a Stored Calling Card Number, Wait for Prompt