43-1101.fm Page 15 Friday, July 9, 1999 9:32 AM

Notes:

If you receive a call while you are storing a number in memory, press TALK to answer the call. After the call, begin again at Step 1.

To change a number stored in mem- ory, simply store a new number in that memory location.

Entering a Pause in a Memory Number

In some telephone systems, you must dial an access code (9, for example) and wait for the second dial tone before you can dial an outside number. You can store the access code with the phone number. However, you should also store a pause after the access code to allow the outside line time to connect. To do so, press PAUSE to enter a 3-second pause after entering the access code. For a longer pause, press PAUSE again.

PAUSE

Dialing a Stored Number

Press TALK. When you hear the dial tone, press MEMORY then the memory location number. The phone dials the number.

Chain Dialing Service Numbers

For quick recall of numbers for special services (such as alternate long distance or bank by phone), store each group of numbers in its own memory location.

When calling special services, dial the service’s main number first. Then, at the appropriate place in the call, press MEMO- RY, then the number for the location where the additional numbers are stored.

Note: If you use pulse dialing, be sure you have stored a tone entry in another memory location (see “Using Tone Ser- vices on a Pulse Line” on Page 12).

Testing Stored Emergency Numbers

If you store an emergency service’s num- ber (police department, fire department, ambulance) and you want to test the stored number, make the test call during the late evening or early morning to avoid peak demand periods. Remain on the line to explain the reason for your call.

15

Page 15
Image 15
Radio Shack ET-1101 owner manual Entering a Pause in a Memory Number