ADJUSTING THE HEADSET
1.Place the headset on your head with the earpiece over either ear.
2.Adjust the headset band until it rests with almost no pressure on your ear and the top of your head.
If the headset is loose, adjust it inward slightly to tighten it. If the headset is tight, gently pull the head- set band out to loosen it.
3.Hold the headset in place, and adjust the microphone boom until it is about even with your chin. Experiment until you find the most comfortable posi- tion.
Caution: The microphone boom swivels on the headset. Do not bend the microphone boom while you adjust it.
Note: When you are not using the head- set, place it on the headset hanger. Oth- erwise (if you just lay it down on a flat surface, for example), you might have to repeat these adjustments.
SETTING THE RINGERS ON OR OFF
The ringer switch on the right side of the base controls both the keypad and base ringers. To have the
RINGER
With RINGER set to OFF, the phone does not ring, but you can still make outgoing calls. If you hear an extension telephone ring, you can answer the incoming call on this phone. The CHARGE/IN USE indica- tor on the base and the IN USE indicator on the keypad flash until you answer the call.
9
