•If the battery pack becomes weak during a call, the handset beeps ev- ery 3 seconds and Low Battery flashes. When this happens, you cannot make another call on the phone until you recharge the battery pack.
•About once a month, fully discharge the battery pack by keeping the handset off the base until Low Battery flashes. Otherwise, the battery pack loses its ability to fully recharge.
•If the display is blank and the phone does not work, recharge the battery pack. (The battery power might be too low to light the display.)
•If you are not going to use your phone for an extended period of time, disconnect the battery pack. This increases the battery pack’s usable life.
•The supplied battery pack should last for about a year. When it loses its ability to fully recharge, order a replacement battery pack from your local RadioShack store (see “Re- placing the Battery Pack” on Page 26).
SETTING THE DIALING MODE
Set DIAL MODE on the back of the base for the type of service you have. If you are not sure which type you have, once the battery pack is fully charged, do this test.
1.Be sure DIAL MODE is set to T (tone).
2.Lift the handset, press TALK, and listen for a dial tone.
3.Press any number other than 0.
Note: If your phone system requires that you dial an access code (9, for example) before you dial an outside number, do not dial the access code either.
If the dial tone stops, you have
If the dial tone continues, you have pulse service. Set DIAL MODE to P (pulse).
11
