Radio Shack ET-1102 owner manual Connecting and Charging the Battery Pack

43-1102.fm Page 9 Tuesday, August 17, 1999 4:37 PM

4.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.

5.Route the modular and adapter cords through the grooves on the bottom of the bracket.

Grooves

6.Align the keyhole slots with the mounting screws, and slide the base downward to secure it.

8.Plug the adapter into a standard AC outlet.

9.Press and lift out the handset hold- er, rotate it 180× , then snap it back into place so it holds the handset.

10.Lift the base’s antenna to a vertical position.

7.Plug the modular cord into a modu- lar phone line jack.

CONNECTING AND CHARGING THE BATTERY PACK

The ET-1102 comes with a recharge- able nickel-cadmium battery pack in the handset but not connected. Before using your phone, you must connect the bat- tery pack, then charge it for about 24 hours.

9