Radio Shack ET-1102 owner manual Using Flash, Paging

43-1102.fm Page 15 Tuesday, August 17, 1999 4:37 PM

USING FLASH

FLASH performs the electronic equiva- lent of a switchhook operation for spe- cial services, such as Call Waiting.

For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.

Note: If you do not have any special phone services, pressing FLASH might disconnect the current call.

USING TONE SERVICES ON A PULSE LINE

Some special services, such as bank- by-phone, require tone signals. If you have pulse dialing, you can still use these special tone services by following these steps.

1.Be sure DIAL MODE is set to P.

2.Dial the service’s main number.

3.When the service answers, press TONE( ). Any additional numbers you dial are sent as tone signals.

4.To reset the phone to pulse dialing, simply hang up or press FLASH (see “Using FLASH” on Page 15).

PAGING

To page the person who has the hand- set or to locate the handset when the phone is not in use, press PAGE/FIND. The handset beeps for 2 seconds.

To have the handset beep for a full minute, hold down PAGE/FIND for 2 sec- onds. To stop the beeping sooner, press TALK twice.

15