4.Press SELECT. A menu appears with the three options listed below. Press s or t to choose an option, fol- low the instructions listed, then press SELECT.
Edit Memory n. Edit the record as described in Steps 5 through 8 of “Storing a Name and Number in Memory” on Page 16.
Delete Memory n. The display prompts you to confirm the deletion. Move the cursor to Yes or No, then press SELECT or DELETE. The phone beeps, and Memory n De- leted appears.
Go Back. Returns you to the list of memory numbers.
Entering a Pause
In some telephone systems, you must dial an access code (9, for example) and wait for a second dial tone before you can dial an outside number. You can store the access code with the phone number. However, you should also store a pause after the access code to allow the outside line time to connect. To en- ter a
18
Reviewing Memory Numbers
To review your memory numbers, press MEM. The list of memory location num- bers
To see the stored phone numbers, press
. An arrow to the right of the number means it is longer than 14 digits. Press 
again to see the rest of the number.
Repeatedly press 
to return to the name display.
To exit the memory number list, press MEM.
To see a stored name and phone num- ber at the same time, press SELECT when the cursor is by a memory location number. To exit this display without stor- ing any changes, hold down DELETE un- til the display clears.
Dialing a Memory Number
To dial a number stored in memory, lift the handset and press MEM. The list of memory location numbers appears. Choose a memory location
You can also dial a memory number by pressing TALK first, then pressing MEM and entering a memory location number.
