Radio Shack ET-1102 owner manual Storing Your Area Code

43-1102.fm Page 13 Tuesday, August 17, 1999 4:37 PM

STORING YOUR AREA CODE

To quickly dial a number from a Caller ID record (see “Dialing Numbers from a Caller ID Record” on Page 21) or to cor- rectly store a number from a record into a memory dialing location (see “Storing a Caller ID Record to Memory” on Page 21), you must store your local area code in the ET-1102’s memory. Then, when you dial from a Caller ID record, the ET-1102 skips the area code if it matches the one you stored.

Follow these steps to store your area code.

1.Lift the handset and press FUNC- TION.

1.Press 3 (or t twice) to select Area Code.

2.Press SELECT, then enter your 3- digit area code. If you make a mis-

take, repeatedly press or to move the cursor over the incorrect digit, then enter the correct number.

Note: If an area code is already stored, it appears on the display when you press SELECT. To delete the area code, press DELETE three times. Then enter your area code.

3.Press SELECT to store the area code, then press FUNCTION or re- turn the handset to the base to clear the display.

13