Chain-Dialing Service Numbers
For quick recall of numbers for special services (such as bank by phone), store each group of numbers in its own mem- ory location.
Dial the service’s main number first. Then, at the appropriate place in the call, press MEM and enter the number for the location where the additional in- formation is stored.
Testing Stored Emergency Numbers
If you store an emergency service’s number (police department, fire depart- ment, ambulance) and you choose to test the stored number, make the test call during the late evening or early morning hours to avoid peak demand periods. Also, remain on the line to ex- plain the reason for your call.
USING A HEADSET
You can make or answer calls with
mm)plug. Contact your local Ra- dioShack store for a suitable headset.
To connect the headset, pull open the rubber cover marked 
on the side of the handset, then insert the headset’s plug into the jack.
Notes:
•Connecting a headset disconnects the handset’s earpiece and micro- phone.
•VOL s or t on the handset also con- trols the headset’s volume.
•If you place the handset on the base to recharge it while the headset is connected, be sure the handset seats properly.
With a headset connected, you can make or answer calls as usual using the keys on the handset.
You can use a handset holder (available from your local RadioShack store) to hang the handset on your belt for greater convenience.
When you finish using the headset, dis- connect it from the handset and close the rubber cover to protect the jack.
19
