•If you make a mistake, move the cursor over the error, then enter the correct character, or press DELETE to delete a character. To delete all the characters, hold down DELETE for at least 1 sec- ond.
6.Press SELECT. Store Number ap- pears.
7.Enter the phone number and any tone or pause entries (see “Using Tone Services on a Pulse Line” on Page 15 and “Entering a Pause” on Page 18).
Instead of using the lower keypad keys, you can use t or s to enter the number and other entries and 
or 
to move the cursor. Repeatedly press t to see the numbers first, then special characters, including hy- phens, pause entries (P), and tone entries (
). Press s to see them in reverse order.
8.Press SELECT. The phone beeps and Memory n Stored appears. After 2 seconds, Memory Store appears, and you can repeat Steps
9.When you finish, press MEM to exit the Memory Store display.
For each stored number, write the per- son’s or company’s name next to the ap- propriate location number on the supplied memory directory sticker. (Use a pencil in case you need to change the number later.) Peel the backing from the sticker and attach it to the phone as shown.
To replace a stored number, simply store a new one in its place.
Editing or Deleting a Number in Memory
Follow these steps to edit or delete a memory number.
1.Lift the handset.
2.Hold down MEM until Memory Store and a list of memory loca- tion numbers appear on the display.
3.Choose a memory location
17
