43-1021.fm Page 24 Tuesday, August 17, 1999 9:14 AM

Chain-Dialing Service Numbers

For quick recall of numbers for special services (such as alternate long distance or bank by phone), store each group of numbers in its own memory location.

When calling special services, dial the service’s main number first. Then, at the appropriate place in the call, press MEM and SETUP, enter the number for the lo- cation where the additional information is stored, and press CALLBACK.

Testing Stored Emergency Numbers

If you store an emergency service’s number (police department, fire depart- ment, ambulance) and you choose to test the stored number, make the test call during the late evening or early morning hours to avoid peak demand pe- riods. Remain on the line to explain the reason for your call.

Deleting Information in a Single Memory Location

1.Recall the memory location contain- ing the information you want to delete.

2.Press DELETE. Clear ? and

DEL appear.

3.Press DELETE again to confirm de- letion. The next higher memory lo- cation number and the number stored there appear. If no number is stored in that location, No number appears.

To exit without deleting the informa- tion, wait 30 seconds without press- ing any button.

Deleting Information in All Memory Locations

1.Press MEM, then SETUP.

2.Repeatedly press REVIEW s or t un- til TOP OF LIST or END OF LIST appears.

3.Press DELETE. Clear ? ALL? and

DEL appear.

4.Press DELETE again to confirm de- letion. Clear OK appears briefly.

To exit without deleting all of the memory location information, wait 30 seconds without pressing any button.

24

Page 24
Image 24
Radio Shack ET-521 owner manual Chain-Dialing Service Numbers, Testing Stored Emergency Numbers