Radio Shack ET-687 owner manual Fm Page 10 Friday, August 13, 1999 1112 AM

43-687.fm Page 10 Friday, August 13, 1999 11:12 AM

2.Insert the bracket’s tabs into the base’s lower tab slots as shown, then press down on the bracket’s clips and insert them into the clip slots.

Lower Tab Slots

Tabs

Clip Slots

3.To connect the phone to a two-line phone jack, plug one end of the sup- plied two-line phone cord into the TEL LINE 1/2 jack on the back of the phone.

Note: If you connect the phone to a two-line phone jack with a two-line cord, do not connect a cord to the TEL LINE 2 jack or the phone might not operate properly.

To connect the phone to two one- line phone jacks, plug one end of the supplied two-line cord to the TEL LINE 1/2 jack, and plug another cord (not supplied) into the TEL LINE 2 jack.

10

To connect the phone to a single one-line phone jack, plug one end of the supplied cord into the TEL LINE 1/2 or TEL LINE 2 jack.

4.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack.

5.Route the modular and adapter’s cords through the grooves on the bracket as shown. If you are using two phone cords, route the second cord through one of the wide grooves on the bracket.

Grooves