43-687.fm Page 8 Friday, August 13, 1999 11:12 AM
6.Connect the phone cord(s) to the modular phone line jack(s).
7.Lift the base’s antenna to a vertical position.
On a Wall Plate
1.Insert the bracket’s tabs into the base’s lower tab slots as shown, then press down on the bracket’s clips and insert them into the clip slots.
Lower Tab Slots
Tabs
Clip Slots 
2.To connect the phone to a two-line wall plate jack, plug one end of the supplied short, two-line phone cord into the TEL LINE 1/2 jack on the back of the phone.
8
Note: If you connect the phone to a two-line phone jack with a two-line cord, do not connect a cord to the TEL LINE 2 jack or the phone might not operate properly.
To connect the phone to a one-line wall plate jack and another one-line jack, plug one end of the supplied short, two-line cord to the TEL LINE 1/2 jack, and plug another cord (not supplied) into the TEL LINE 2 jack.
To connect the phone to a single one-line wall plate jack, plug one end of the supplied cord into the TEL LINE 1/2 or TEL LINE 2 jack.
3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack.
