4.Route the adapter cord through the narrow groove on the bracket. If you are using two phone cords, route the second cord through one of the wide grooves on the bracket.
Narrow
Groove
Wide
Grooves
5.Plug the other end of the short mod- ular cord into the wall plate jack, then align the bracket’s keyhole slots with the wall plate studs and slide the base downward to secure it. If you are using two phone cords, plug the second cord into the sec- ond phone jack.
6.Plug the adapter into a standard AC outlet.
7.Press and lift out the handset holder, flip it over as shown, then snap it back into place.
8.Lift the base’s antenna to a vertical position.
Directly on a Wall
To mount the base directly on the wall, you need two screws (not supplied) with heads that fit into the keyhole slots on the bottom of the base.
1. Drill two holes 315/16 |
|
|
|
| 5/16" | ||
|
|
|
| ||||
inches (100 mm) |
|
|
|
|
|
|
|
apart. Then thread a |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
screw into each hole, | 3 | 15/16" |
|
|
|
| |
letting the heads ex- |
|
|
|
|
|
|
|
tend about 5/16 inch (8 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
mm) from the wall. |
|
|
|
|
|
|
|
9
