43-687.fm Page 7 Friday, August 13, 1999 11:12 AM
On a Desk Top
1.Insert the bracket’s tabs into the base’s upper tab slots as shown, then press down on the bracket’s clips and insert them into the clip slots.
Clip Slots
Clips
Upper Tab Slots
2.To connect the phone to a two-line phone jack, plug one end of the sup- plied two-line phone cord into the TEL LINE 1/2 jack on the back of the phone. Route the cord through the strain-relief slot on the bracket.
Strain
Relief
Slot
To connect the phone to a single one-line phone jack, plug one end of the supplied cord into the TEL LINE 1/2 or TEL LINE 2 jack. Route the cord through the strain-relief slot on the bracket.
3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.
Strain
Relief
Slot
Note: If you connect the phone to a two-line phone jack with a two-line cord, do not connect a cord to the TEL LINE 2 jack or the phone might not operate properly.
To connect the phone to two one- line phone jacks, plug one end of the supplied two-line cord to the TEL LINE 1/2 jack, and plug another cord (not supplied) into the TEL LINE 2 jack. Route both cords through the strain-relief slot on the bracket.
4.Route the adapter’s cord through the strain relief slot on the bottom of the bracket.
Strain
Relief
Slot
5.Plug the adapter into a standard AC outlet.
7
