Radio Shack ET-687 owner manual Connecting and Charging the Battery Pack

43-687.fm Page 11 Friday, August 13, 1999 11:12 AM

6.Align the bracket’s keyhole slots with the mounting screws and slide the base downward to secure it.

10.Lift the base’s antenna to a vertical position.

7.Connect the phone cord(s) to the modular phone line jack(s).

8.Plug the adapter into a standard AC outlet.

9.Press and lift out the handset holder, flip it over as shown, then snap it back into place.

CONNECTING AND CHARGING THE BATTERY PACK

The ET-687 comes with a rechargeable nickel-cadmium battery pack in the handset but not connected. Before using the phone, you must connect the battery pack, then charge it for about 24 hours.

1.Press down and slide off the battery pack compartment cover as shown.

2.Unfasten the plastic retainer strap and lift the battery pack out of the compartment.

3.Plug the battery pack’s connector in- to the socket in the compartment (the connector fits only one way), then replace the battery pack and fasten the retainer strap.

11