Radio Shack ET-927 Adjusting Ringers, Turning On/Off the Ringers, Setting the Ringer’s Volume

43-1097a.fm Page 13 Tuesday, August 31, 1999 10:01 PM

ADJUSTING THE

RINGERS

The ET-927’s handset and base each have four different ringer tones. You can set the base’s and handset’s ringer tone, or turn off the ringer on either or both.

Turning On/Off the Ringers

To have the base ring when a call comes in, set RINGER ON/OFF on the back of the base to ON.

Note: Even if you turn off the ringer on the handset or base, you can still make calls using that keypad, and you can still answer calls if you hear another phone on that same line ring (see “Operation” on Page 14).

Setting the Ringer’s Volume

To adjust the ringer’s volume when the phone is not in use, repeatedly press VOLUME ▲ or ▼ on the handset.

Illus

To have it not sound, set RINGER ON/ OFF to OFF.

To have the handset ring when a call comes in, set RINGER ON/OFF on the handset’s left side to ON.

location of handset’s

RINGER ON/OFF set to ON

Checking/Setting the Ringer Tone

The base and handset are both preset to use the same ringer tone (1). To change or hear the different tones, press FLASH then 1, 2, 3, or 4 when the phone is not in use. (The last number button you pressed is the tone you will hear.)

add illus of FLASH

To have it not sound, set RINGER ON/

OFF to OFF.

13