Radio Shack ET-927 owner manual Using Mute, Using Tone Services on a Pulse Line, Using Flash

43-1097a.fm Page 15 Tuesday, August 31, 1999 10:01 PM

USING MUTE

The MUTE button on the handset lets you talk to someone else in the room without the person on the other end of the phone line hearing your conversa- tion. Press MUTE during the call. The BATT LOW indicator on the handset lights steadily.

Illus

Press MUTE again to resume your phone conversation. The BATT LOW in- dicator turns off.

USING TONE SERVICES ON A PULSE LINE

Some special services, such as bank- by-phone, require tone signals. If you have pulse service, you can still use these services.

With T/P set to P, just press when you want to begin sending tones. Any additional numbers you dial are sent as tone signals. When you hang up, the phone automatically resets to the pulse mode.

illus

USING FLASH

You can use FLASH on the handset to produce a switchhook signal for special phone services, such as Call Waiting. If you have Call Waiting, press FLASH to take an incoming call without discon- necting the current call. Press FLASH again to return to the first call.

illus -- make sure all button labels are visible

Note: If you do not have any special phone services, pressing FLASH might disconnect the current call.

15