Radio Shack ET-929 owner manual Storing Your Area Code, Setting Caller ID with Call Waiting

43-1099.fm Page 13 Tuesday, August 17, 1999 4:19 PM

STORING YOUR AREA CODE

To quickly dial a number from a Caller ID record (see “Dialing from a Caller ID Record” on Page 21) or to correctly store a number from a record into a memory dialing location (see “Storing a Caller ID Record to Memory” on Page 22), you must store your local area code in the ET-929’s memory. Then, when you dial from a Caller ID record, the ET-929 skips the area code if it matches the one you stored.

Follow these steps to store your area code.

1.Lift the handset. If talk appears, press TALK to turn it off.

2.Press FUNCTION twice. AREA CODE and 1- appear.

Note: If an area code is already stored, it appears after the 1–. Press DELETE three times to erase it.

3.Enter your 3-digit area code, then press MEM. The handset beeps and STORING briefly appears.

4.Return the handset to the base to store the new area code.

To delete an area code, follow Steps 1 and 2, then press MEM without entering a new area code. DELETING appears.

SETTING CALLER ID WITH CALL WAITING

If you subscribe to Caller ID with Call Waiting, you can set the ET-929 to show Caller ID information for an incoming call even while you are already on the phone.

Follow these steps to turn Caller ID with Call Waiting on or off.

1.Lift the handset. If talk appears, press TALK to turn it off.

2.Press FUNCTION three times. CIDCW (Caller ID Call Waiting), the current setting, and ON-1OFF-0appear.

3.Press 1 to turn this feature on, or 0 to turn it off.

4.Press MEM. The handset beeps and briefly displays the new setting.

5.Return the handset to the base to store the new setting.

13