Radio Shack ET-929 owner manual Using Redial, Using Flash

43-1099.fm Page 15 Tuesday, August 17, 1999 4:19 PM

If you hear other conversations or ex- cessive noise during a call, press CHAN- NEL to select a different channel. The new channel number briefly appears.

Note: If the handset is too far from the base, the channel might not change. Move closer to the base and try again.

USING REDIAL

You can quickly dial the last number di- aled. When you hear a dial tone, simply press REDIAL.

USING FLASH

FLASH performs the electronic equiva- lent of a switchhook operation for spe- cial services, such as Call Waiting.

For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.

Note: If you do not have any special phone services, pressing FLASH might disconnect the current call.

Notes:

•The redial memory holds up to 32 digits, so you can redial long- distance as well as local numbers.

•The redial memory also holds pause entries. See “Entering a Pause” on Page 18.

•The redial memory does not store a flash entry or any digits you enter af- ter you press FLASH (see “Using Flash”).

USING TONE SERVICES ON A PULSE LINE

Some special services, such as bank-by- phone, require tone signals. If you have pulse dialing, you can still use these spe- cial tone services by following these steps.

1.Be sure DIAL MODE is set to P (pulse).

2.Dial the service’s main number.

15