3.When the service answers, press TONE (
). Any additional numbers you dial are sent as tone signals.
4.After you complete the call, return the handset to the base or press TALK. The phone automatically re- sets to the pulse mode.
Note: When you dial a number before you press TALK, you can enter a tone signal as part of the number (the display shows 
). When you press TALK, the phone automatically adds a
PAGING
To send a page from the base to the handset, when the phone is not in use, press PAGE/FIND on the base. The handset beeps five times and PAGING appears.
16
To have the handset beep for 1 minute, hold down PAGE/FIND for at least 2 sec- onds. To stop the handset’s beeping, press TALK twice.
MEMORY DIALING
You can store up to 20 phone numbers and names in memory, then dial a stored number by entering a
Each number can be up to 16 digits, and each name can be up to 12 characters.
Storing a Number and Name in Memory
Notes:
•An error tone sounds and the phone exits the storing process if you wait more than 20 seconds between each key press.
•If you receive a call during memory entry, the phone exits the storing process.
1.Lift the handset. If talk appears, press TALK to turn it off.
2.Press FUNCTION. DIAL MEMORY? and
3.Press 1 to store a new number.
