SETTING THE REPEATER OFFSET FREQUENCY
The
Note: This setting only affects the VFO mode. If you saved a fre- quency offset in a memory, that setting is not affected.
1.With power off, hold down FUNC and turn on the
2.Hold down FUNC and repeatedly press until r and the current offset appear. 5.00 appears if no offset is currently set.
3.Repeatedly press or until the desired offset appears. You can set an offset between 0 and 8 MHz in 50kHz steps.
4.Press PTT to store the setting and exit the menu.
TURNING DUPLEX
OPERATION ON AND OFF
To turn on duplex (repeater use) operation for the VFO mode, press FUNC + SC (RPT). Provided the current repeater offset val- ue is not 0.00, the current offset indicator (+ above or – below) appears above the displayed frequency. Press FUNC + SC (RPT) again to turn it off.
27