RECALLING MEMORIES
To recall saved memory settings, press MR so appears. Then press or to select the desired memory location.
Press MR again to return to the VFO mode, (See “Selecting Fre- quencies (Direct Tuning)” on Page 23.)
CLEARING A SINGLE MEMORY
Follow these steps to clear any single memory location.
1.Press MR . and the last used memory location appear.
2.Repeatedly press or to select the desired memory location.
3.Press FUNC+MR. The selected memory location and flash.
4.Hold down FUNC for several seconds. The memory location clears and
5.Press MR to exit the memory mode.
Note: To clear all memory locations, see “Resetting the HTX- 400” on Page 44.
30